Liberon Wax & Polish Remover - 500 ml.
Liberon Wax & Polish Remover removes old wax, dirt, smoke and grime from antique and modern wood furniture and interior woodwork including doors, beams, dado rails and bannisters without harming the original finish and patina. This unique formula should not lift veneers or raise the grain, making it suitable for even the most delicate surfaces. Use to remove built up layers of wax which may be causing a haze or bloom on the surface.
Directions For best results soak a pad of Liberon Extra Fine Steel Wool (0000) in Wax & Polish Remover and gently wash the surface going with the grain where possible. Allow a few minutes for the Wax & Polish Remover to work, then while the suface is still wet, use a clean lint free cotton cloth to wipe off all the old softened wax. Repeat this process until all the old wax is removed. Allow 24 hours for the treated surface to dry completely before re-finishing.
Please refer to product label for complete product information.
Directions For best results soak a pad of Liberon Extra Fine Steel Wool (0000) in Wax & Polish Remover and gently wash the surface going with the grain where possible. Allow a few minutes for the Wax & Polish Remover to work, then while the suface is still wet, use a clean lint free cotton cloth to wipe off all the old softened wax. Repeat this process until all the old wax is removed. Allow 24 hours for the treated surface to dry completely before re-finishing.
Please refer to product label for complete product information.
